Wont let me connect to Horizon Life (PC)

Troubleshooting Hub Legacy Troubleshooting FH4 Troubleshooting
1

Stuck on Finding Horizon Life Session. and then it just go away and no error etc. anyone else with this problem on pc ?
lvl 54, so it has nothing to do with my progression at all.
any tips ?

1 Like
2

same for me

3

I had the same problem yesterday too, tried several fixes and stuff.

This obviously has to do with Teredo, which is some sort of networking mechanic for IPv6 stuff, that Xbox App needs to work.

Try two things:

Go to System Settings → Gaming → Xbox Network and run the check.
The only important things are, that you have NAT-Type open or medium and Server Connectivity connected.

If there are any other errors, try the following:
First, press the “Repair it” button on the same page.

Then, if you are on FritzBox!, Teredo is blocked by default. That was the thing I had to turn off to make it work. If you are on Fritzbox, you need to turn the Teredo blocking off.

It is on the “Internet” Submenu, then “Filter” → “Lists”

And there is a checkbox “Teredo filter active” … just uncheck that, restart your Router and you should be good to go. Thats at least what I did yesterday and it worked.

1 Like
4

Thanks mate so much for FritzBox tip,it solved mine problem!

5

same Problem pissing me off

6

Seems like many pc players have problem with this. i just wanna play with my friends and do forzathons :S

7

Are you using Fritzbox routers?

8

nope but i followed these steps that i found on another post and it worked for me :slight_smile:

I had the same problem last night when trying to connect and this is what i found early this morning, it worked for me

  1. Click Start , type services.msc in Start search box and hit Enter.
  2. Right-click the Peer Networking Grouping service and select Properties .
  3. Check if the service is started; if not, right-click and select Start .
  4. You may also set the Startup type to Automatic under Properties .
  5. Click OK .
    and restart the computer. if that dosent work. do this to.
    . Run command Prompt as administrator
  6. Type “netsh” and press enter
  7. Type “int teredo” and press enter
  8. Type “set state disabled” and press enter
  9. Type “int ipv6” and press enter
  10. Type “set teredo client” and press enter

i did both steps just to be sure before restarting my pc
it seems to be a teredo issue.

it still needs to be fully fixed by Devs

Advice do not spend long times looking thru Car sections or you might lose connection to server.

Enjoy