[ANSWERED] [PC] Can't connect to Horizon Life (DNS error)

[vegasm]

Hi all,

I’m trying to play online but the game keeps giving this error:

Anyone knows what could be the cause of this?

Thanks in advance!

[Daggeraasd4]

Same problem no fix

[GiantBRILLiANT]

Got this same issue as well

[TesSiR]

Same here…

[DannyShields4]

Same here…
We need a fix ASAP!!!

[Keours]

same here everything says failed on the error. Tried almost every fix for FH3 and turning off and on things

[PURE_NFS_Zod]

same problem

[Fuegoman96]

Same… I’ve tried a lot of things and the problem is still there…

[M3NT4]

Same here as well.
I spent like 4 hours fixing everything I found from FH3 or Xbox, but nothing worked. Support has not replied me for 6 hours now ( not a surprise).
GGs guys…

[McArabine]

Same here…

[AffeGepard32522]

i have the same problem i restart the game but i have still and no answer from support

[Chrome155]

Same issue here. Got out of the prolog and I still cannot connect to Horizon Life. Really hoping we can find a fix, online was one of the main reasons I bought the game :/.

[SAS_Bacon]

I had the same problem last night when trying to connect and this is what i found early this morning, it worked for me

1. Click Start , type services.msc in Start search box and hit Enter.
2. Right-click the Peer Networking Grouping service and select Properties .
3. Check if the service is started; if not, right-click and select Start .
4. You may also set the Startup type to Automatic under Properties .
5. Click OK .
   and restart the computer. if that dosent work. do this to.
   . Run command Prompt as administrator
6. Type “netsh” and press enter
7. Type “int teredo” and press enter
8. Type “set state disabled” and press enter
9. Type “int ipv6” and press enter
10. Type “set teredo client” and press enter

i did both steps just to be sure before restarting my pc
it seems to be a teredo issue.

it still needs to be fully fixed by Devs

Advice do not spend long times looking thru Car sections or you might lose connection to server.

Enjoy

[TheSZiMRE]

@SAS_Bacon

I had the same problem last night when trying to connect and this is what i found early this morning, it worked for me

1. Click Start , type services.msc in Start search box and hit Enter.
2. Right-click the Peer Networking Grouping service and select Properties .
3. Check if the service is started; if not, right-click and select Start .
4. You may also set the Startup type to Automatic under Properties .
5. Click OK .
   and restart the computer. if that dosent work. do this to.
   . Run command Prompt as administrator
6. Type “netsh” and press enter
7. Type “int teredo” and press enter
8. Type “set state disabled” and press enter
9. Type “int ipv6” and press enter
10. Type “set teredo client” and press enter

i did both steps just to be sure before restarting my pc
it seems to be a teredo issue.

it still needs to be fully fixed by Devs

Advice do not spend long times looking thru Car sections or you might lose connection to server.

Enjoy

Same issue here, sadly the above steps did not fix it for me, nor anything I found on reddit about FH3 or other XBOX and Teredo related issues…

[Daggeraasd4]

@TheSZiMRE

@SAS_Bacon

I had the same problem last night when trying to connect and this is what i found early this morning, it worked for me

1. Click Start , type services.msc in Start search box and hit Enter.
2. Right-click the Peer Networking Grouping service and select Properties .
3. Check if the service is started; if not, right-click and select Start .
4. You may also set the Startup type to Automatic under Properties .
5. Click OK .
   and restart the computer. if that dosent work. do this to.
   . Run command Prompt as administrator
6. Type “netsh” and press enter
7. Type “int teredo” and press enter
8. Type “set state disabled” and press enter
9. Type “int ipv6” and press enter
10. Type “set teredo client” and press enter

i did both steps just to be sure before restarting my pc
it seems to be a teredo issue.

it still needs to be fully fixed by Devs

Advice do not spend long times looking thru Car sections or you might lose connection to server.

Enjoy

Same issue here, sadly the above steps did not fix it for me, nor anything I found on reddit about FH3 or other XBOX and Teredo related issues…

no fix for me

[AffeGepard32522]

@Daggeraasd4

@TheSZiMRE

@SAS_Bacon

I had the same problem last night when trying to connect and this is what i found early this morning, it worked for me

1. Click Start , type services.msc in Start search box and hit Enter.
2. Right-click the Peer Networking Grouping service and select Properties .
3. Check if the service is started; if not, right-click and select Start .
4. You may also set the Startup type to Automatic under Properties .
5. Click OK .
   and restart the computer. if that dosent work. do this to.
   . Run command Prompt as administrator
6. Type “netsh” and press enter
7. Type “int teredo” and press enter
8. Type “set state disabled” and press enter
9. Type “int ipv6” and press enter
10. Type “set teredo client” and press enter

i did both steps just to be sure before restarting my pc
it seems to be a teredo issue.

it still needs to be fully fixed by Devs

Advice do not spend long times looking thru Car sections or you might lose connection to server.

Enjoy

Same issue here, sadly the above steps did not fix it for me, nor anything I found on reddit about FH3 or other XBOX and Teredo related issues…

no fix for me

me too no fix

[InstarVFeeds]

@AffeGepard32522

@Daggeraasd4

@TheSZiMRE

@SAS_Bacon

I had the same problem last night when trying to connect and this is what i found early this morning, it worked for me

1. Click Start , type services.msc in Start search box and hit Enter.
2. Right-click the Peer Networking Grouping service and select Properties .
3. Check if the service is started; if not, right-click and select Start .
4. You may also set the Startup type to Automatic under Properties .
5. Click OK .
   and restart the computer. if that dosent work. do this to.
   . Run command Prompt as administrator
6. Type “netsh” and press enter
7. Type “int teredo” and press enter
8. Type “set state disabled” and press enter
9. Type “int ipv6” and press enter
10. Type “set teredo client” and press enter

i did both steps just to be sure before restarting my pc
it seems to be a teredo issue.

it still needs to be fully fixed by Devs

Advice do not spend long times looking thru Car sections or you might lose connection to server.

Enjoy

Same issue here, sadly the above steps did not fix it for me, nor anything I found on reddit about FH3 or other XBOX and Teredo related issues…

no fix for me

me too no fix

same for me no fix

[Cutchall]

@SAS_Bacon

I had the same problem last night when trying to connect and this is what i found early this morning, it worked for me

1. Click Start , type services.msc in Start search box and hit Enter.
2. Right-click the Peer Networking Grouping service and select Properties .
3. Check if the service is started; if not, right-click and select Start .
4. You may also set the Startup type to Automatic under Properties .
5. Click OK .
   and restart the computer. if that dosent work. do this to.
   . Run command Prompt as administrator
6. Type “netsh” and press enter
7. Type “int teredo” and press enter
8. Type “set state disabled” and press enter
9. Type “int ipv6” and press enter
10. Type “set teredo client” and press enter

i did both steps just to be sure before restarting my pc
it seems to be a teredo issue.

it still needs to be fully fixed by Devs

Advice do not spend long times looking thru Car sections or you might lose connection to server.

Enjoy

Thank you! This worked for me!

[MonsterTsunami]

@Cutchall

@SAS_Bacon

I had the same problem last night when trying to connect and this is what i found early this morning, it worked for me

1. Click Start , type services.msc in Start search box and hit Enter.
2. Right-click the Peer Networking Grouping service and select Properties .
3. Check if the service is started; if not, right-click and select Start .
4. You may also set the Startup type to Automatic under Properties .
5. Click OK .
   and restart the computer. if that dosent work. do this to.
   . Run command Prompt as administrator
6. Type “netsh” and press enter
7. Type “int teredo” and press enter
8. Type “set state disabled” and press enter
9. Type “int ipv6” and press enter
10. Type “set teredo client” and press enter

i did both steps just to be sure before restarting my pc
it seems to be a teredo issue.

it still needs to be fully fixed by Devs

Advice do not spend long times looking thru Car sections or you might lose connection to server.

Enjoy

Thank you! This worked for me!

Thank you! This worked for me too!

[iM_Skruffy]

@SAS_Bacon

I had the same problem last night when trying to connect and this is what i found early this morning, it worked for me

1. Click Start , type services.msc in Start search box and hit Enter.
2. Right-click the Peer Networking Grouping service and select Properties .
3. Check if the service is started; if not, right-click and select Start .
4. You may also set the Startup type to Automatic under Properties .
5. Click OK .
   and restart the computer. if that dosent work. do this to.
   . Run command Prompt as administrator
6. Type “netsh” and press enter
7. Type “int teredo” and press enter
8. Type “set state disabled” and press enter
9. Type “int ipv6” and press enter
10. Type “set teredo client” and press enter

i did both steps just to be sure before restarting my pc
it seems to be a teredo issue.

it still needs to be fully fixed by Devs

Advice do not spend long times looking thru Car sections or you might lose connection to server.

Enjoy

Worked for me aswell ! thank you