Customization Wish List

Forza Horizon Legacy Horizon FH3 Discussion
123

Factory rims
Offset
Lower-end parts (some cars have them like RS4 wagon, but all high-end cars imo needs these)
Ability to remove spoiler from ALL vehicles
Smaller rim size than original

I’ve played Forza series since FM1 and I hate the fact that I know none of these will happen. Many cars in Forza Horizon 3 is exact same model as we had in Forza Motorsport 2/3/4 with all the errors etc (they have only just a little more polygons and new textures…) Same applies to customization (visual parts).

We have today Forza Motorecycle and Recycle Horizon series. Sad but true. Forza Horizon 3 is great game for new comers, but old and recycled for players like me.

2 Likes
124

Wide body kits have big spoilers and large splitters, but add little to no aero. It would be so nice if we could have beautiful wide body cars that can also turn. The NSX is the biggest example of how ridiculous it is that we cannot adjust it nor does it give any semblance of down force. It has a large wing and some big canards that should be adjustable, but for some reason we can’t touch them.

1 Like
125

Manufacturer wheels should be available for all cars.
For example, all Ford wheels should be available to use on all Ford cars, not limited to whatever stock wheels they come with. I would love to put 12 slotters on my Phase III but it only comes with 5 slotters. The XB GT has 12 slotters so they are already in the game but you can’t use them on the Phase III. While 5 slotters are the original wheels I much prefer the look of 12 slotters.

3 Likes
126

I agree

1 Like
127

Since this game got the Liberty Walk wide body kit, I would like to see if they can add the Novitec body kit as well. Here are some examples below:

Here is their website:

128

Those are definitely an improvement over the Liberty Walk kit, but then again, smearing mud on a car looks better than a Liberty Walk kit.

129

The Novitec body kit is a higher quality or a higher end product.

130

It certainly looks like it. The Liberty Walk kits look downright cheap and tacky.

131

I’d love to see that first one but with a Mazda emblem sitting there smiling.

those kits do look better than whats in the game.

132

I really like Horizon 3 so far. For me there are some things that are long over due in forza in general, but would be great in the horizon games.

  • decals should have finish options. Like putting matte decals on a gloss paint or vice versa. Window decals, individual rim colors

  • wheels and tires should be more customizable. Tire wall size, rim depth, tire width, better selection of tires with PROPER DRAG SETS, small and big tire drag slicks/Drag radials, drift tires with smoke, big huge off road tires, 44" mudders and sand tires.

  • suspension set ups for specific types of racing, circuit racing, full on rally, off road, DRAG and DRIFT. Specific parts and upgrades for each different type of car. Tube chassis and tubbed rear ends for Drag, lift kits and high travel shocks for off road. Whatever drifters need.

  • Engine upgrades and swaps that make sense. Not just a flat across the board 6.2 V8, V10 and a V12. Yeah, there’s some 4cyl and rotors that are there, but we should have at least a couple choices of manufacturer engines. Like a '69 Challenger should have the 340, 383, 440 and the 426, not so much a V12. There should be some huge displacement engine for muscle cars like the 502 or 572 both GM, I think

  • tunable boost for turbos and superchargers, proper NOS, not video gamey,

  • working drag racing, not a top speed run Bonneville style like the current runway thing. But a drag strip with a working tree. I can’t imagine it would be too terribly hard to build a drag strip, at the start have the tree be always on and you just pull up and stage either against somebody or solo

  • for drifting, same sort of upgrades and even a place to run those cars the way they are supposed to be run

Horizon should be all things motorsport, a celebration or speed and power. Also should be about being able to express your automotive style, be it Exotics, hyper cars, DRAG or DRIFT, rally, whatever.

I hope one of these days, at least some of these thing can make their way into the game. Whether it’s FH3 or FM7 or if it happens, FH4.

1 Like
133

I’m not saying to add a dlc just update the game and add new bodykits or customization in mattar of fact now I know the hoonigan dlc is coming so like when this dlc come out I know this game will update but here’s mine customization for this game.

So I want new spoliers in the game like ducktail for the R35 and for the RC-F

Different taillights for different cars like for the GT86/BRZ

New widebody
So for the R35 I know there’s a LB kit for it
But I like to see a rocketbunny kit for the regular
And the pandem rocketbunny and Ben sopra
So for the GT86/BRZ I like to see the varis kit,rocketbunny v1 and v3 kit.
For the mx5 2016 there’s a pandem rocketbunny
And for the E30

And add the widebody for the 350Z like Ben sopra and rocketbunny

Add lug nuts and customize the interior I know I’m asking too much this would make the game little bit cooler and I forgot one more thing more rims that’s

134

Neon kit for your cars I would love the night race be lit up with them.

Have horns tied to one car as well plates that long shot.

Nos I think it be insane n fun.

Custom rims it be so sweet to create your own look like a skull rim.

135

I’ve already posted this in a wish list thread, but will replicate it here

More different wheels, like old school japanese wheels and modern ones too.
Wheel offset option
More body kits for existing cars, like re super g for rx7 or vertex for s15, voltex for evo8/9, etc. would be cool to get at least one more kit for tuner cars, rocket bunny is cool, but it gets boring when it’s an only option

136

I’d love to have rally rims. I can’t understand how FH3 doesn’t have any of the typical rally rims, when it is featuring a large selection of rally cars:

1024×480 644 KB

1 Like
137

Hey!
Is it just me who want to get a really good car and good stance fitment?
an option to move the wheels so it looks much better?
FH3 has a great stance/fitment community, and most people who build those cars really want to have this option
write in the comments and make this thread visible to TURN10 so it may be possible
# Turn10AddOffset

1 Like
138

THEY NEED TO ADD OFFSET FAST!!!

139

A List of Upgrade Options Long overdue

Solid Axle/Leaf Springs Front Drag Race Suspension “Gasser”

Wheel Tubs,Shortened Axle width and DOT Drag Slicks (something like a Mickey Thompson 3551 Et Street R Bias-Ply Tire 26 X 10.5R15)

Ability to Tint Headlight and Taillight Glass/Smoked (or Custom) Dress Covers
Billet “Phantom” Grille insert for ALL vehicles with a forward Grille mesh of some type

Ability to Remove Grille insert on All/Most Front Engine vehicles (expose innercooler/oil cooler when equipped otherwise the expose radiator/radiator bracing)

Ability to paint/Remove Any type of Accent/Moulding/Body Trim and Bumpers (Body Color or otherwise FULLY Dechrome)

[ The following ideas are inspired by the under explored feature referred to as Auto-sculpt last used by EA Games in NFS-Carbon.
The feature had limited functionality for bumpers and Spoilers, and was best applied to User created Rims.]
Allow EVERY Vehicle to have a Custom Wide body Created and Manipulated
(User created) By stretching or exaggerating the existing in game Models incrementally at important Key points around wheel well openings with a smooth graduation into the remaining body line
Allow Corrective wheel alignment with “New edge” should be set in the options of -/+ offsetting or “Rim Dish”

Allow EVERY Vehicle to have additional Custom Hoods to be created and Manipulated originating from a selection of Base forms; Street Scoop, RamAir, Cowl Induction, and Dual Cowl Induction. This feature should allow for visible Intake Components albeit the upper deck of a Super Charger, a set of Down Draft Carburetor Venturi Bells, or N/A Airfilter(s)

Additional Classic/Muscle Style Rims

American Racing
AR61 Outlaw I (AR62 Outlaw II is already available in Forza)
VN501 500 Mono Cast (Machined w/Accent)
VN47 Vector
VN69 Ansen Sprint
VN808 Mach5
VN T71R

Cragar
Series 470 Star Wire
Series 32-Keystone Klassic
SERIES 365-V5
SERIES 390C-STREET PRO
SERIES 510-MAGNUM

1 Like
140

Got bored, made this. I think a lot of people will agree with me on this list. Clickable image.
Tweet this to T10 so they will notice it too :stuck_out_tongue:

5 Likes
141

I really appreciated the body kits in fh3, i love this game and i think it would be perfect if turn 10 adds some body kits for a lot of cars, maybe with an expansion pack.
I want something close to the old nfs (like most wanted) where we can choose until 3 body kits per car, it doesn’ t matter if the body kits don’ t have the licence…
Personally i’ m not a fan of liberty walk and it would be perfect if they add something with a different style.

I think that most of forza player agree with me so, let’ s make noise and turn 10 will do this!!!

2 Likes
142

A List of Upgrade Options Long overdue

Paintable Brake Calipers

Being able to paint the rims in 3 separate colors/sections:
Center(center cap and Lugs)
Face
and Lip (including the rives of 2/3 piece rims)

All rims should has an option for a custom inner/outer lip offset known a +/- MM offsetting or DEEP DISH ( I am so sick and damned tired of having next to no selection of deep dish rims and all my builds having mostly the same rim purely for look or inured weight reduction/performance value)

lettering Decals for windshield/rear glass sun strip: default manufactures Lettering and Logo or user created, inclusion of rear passenger and wing glass to body vinyl placements or a “Glass Decal Editor”.

Custom tires in any Compound type -White Lettering, white outline lettering that include the compound title ie “Forza Rally Off road”, traditional white walls, presidential wide whitewalls, white line, Red line,and Gold line

More robust and accurate Exhaust pitch and Volume (This has Never been done properly-the Closest it ever was FH1 with anything Ford/ 13 302 swapped)

Visible Exhaust modification- Diameter and length of visibly exposed tail pipe tip based on upgrade classification.

The inclusion of Pro Drag Exhaust upgrade- Open Header Dump at the would be exhaust flange point
The inclusion of Street Drag Exhaust upgrade- true duel straight pipes (for V and F configured engines/ Single pipe for I configuration) that dump before the first required mandrel bend AKA rear axle clearance tub.

The inclusion of timing advancement/retardation for better performance including the correct audio bytes for using a “Hot Cam” and “Aggressive timing idle”

Interior Customization with a Base beginning at purchase -OE color coordination
(ie a 69 Charger R/T in OE Blue would have white, Fawn(tan) or Charcoal interior while a Black one would have Black, Brown,or Charcoal) As well as custom config by user categorized by
Floors/Carpets
Door Panels
Door Trims
Seats Major (1)
Seats Minor (2)
Seats accent (stitching or trim/seat belts)
Head liner
Steering wheel
Dash Pad (upper)
Dashboard Bolster (lower)
Options for all interior knobs,buttons,switches and window cranks paintable as a single set with any one of all paint types

Mud Flaps- with the options of:
Standard Black Rubber,
Black with Full Color Vehicle Emblem/Logo/Lettering,
Custom paintable,
A secondary Variant of both paintable and Black with a Chrome dress (Not saying the naked lady silhouette, but rather dress protective end caps)

Off road KC Day-lighter type Baja Lights or LED Light

Off road Bolt/Rivet on Fender Flares

Solid Axle/Leaf Springs Front Drag Race Suspension “Gasser”

Wheel Tubs,Shortened Axle width and DOT Drag Slicks (something like a Mickey Thompson 3551 Et Street R Bias-Ply Tire 26 X 10.5R15)

Additional Body modifications that either add “Big bulge” (not the same as wide body) rear quarter widening or cut wheel arches when using big slicks to reduce clipping

Ability to Tint Headlight and Taillight Glass/Smoked (or Custom) Dress Covers
Billet “Phantom” Grille insert for ALL vehicles with a forward Grille mesh of some type

Ability to Remove Grille insert on All where equipped ie Front Engine vehicles (expose intercooler/oil cooler when equipped otherwise the expose radiator/radiator bracing)

Ability to paint/Remove Any type of Accent/Molding/Body Trim and Bumpers (Body Color or otherwise FULLY Dechrome)

The Ability to Use ANY paint type as a vinyl finish

[ The following ideas are inspired by the under explored feature referred to as Autosculpt last used by EA Games in NFS-Carbon.
The feature had limited functionality for bumpers and Spoilers, and was best applied to User created Rims.]

Allow EVERY Vehicle to have a Custom Wide body Created and Manipulated
(User created) By stretching or exaggerating the existing ingame Models incrementally at important Key Points around wheel well openings with a smooth graduation into the remaining body line…Autocorective wheel alignment with “New edge”

Allow EVERY Vehicle to have additional Custom Hoods to be created and Manipulated originating from one of a Base form selection; Street Scoop, Drag scoop, Ram Air Dual Ram Air, Cowl Induction, and Dual Cowl Induction. This feature should allow for a HD detailed and visible Intake Components whether it is the upper deck of a Super Charger, a set of Down Draft Carburetor Bells, “Gasser” type Velocity stacks or N/A Air filter(s)

Additional Classic/Muscle Style Rims

American Racing
AR61 Outlaw I (AR62 Outlaw II is already available in Forza)
VN501 500 Mono Cast (Machined w/Accent)
VN47 Vector
VN69 Ansen Sprint
VN808 Mach5
VN T71R

Cragar
Series 470 Star Wire
Series 32-Keystone Klassic
SERIES 365-V5
SERIES 390C-STREET PRO
SERIES 510-MAGNUM

All “Dayton Wire Wheels” Branded Wheels
All “Galaxy” Branded Wire wheels Galaxy Wire Wheels - Wired Down

1 Like