All you WHEEL Experts out there

Howdy
I use a thrustmaster tx wheel and only half of me plays it LOL only got one arm and one leg the other two are somewhere in the desert
any way the settings bellow are the ones I use and they are just great but what I want to know is can they be improved

Originally Posted by: HNT Awesome

From the Thrustmaster Control Panel application (connected to PC), on the “Gain Settings” tab, my settings are as follows
Master Gain Settings:
Overall Strength of all Forces = 100%
Detailed Gain Settings:
Constant = 60%
Periodic = 90%
Spring = 70%
Damper = 70% (affects the weight of the wheel)
‘Auto-Center Settings’ is set to ‘by the game (Recommended)’

Firmware: 49.B9

In Forza 6 Advanced Controller Options:
Steering = 0-100
Acceleration = 2-100
Deceleration = 2-100
Clutch = 5-95
Handbrake 0-100
Vibration = 20
FFB Scale = 70
Wheel Rotation Angle = 540

Wheel Mode Settings
DOR = 540

Thanks and see you on the Track

I have found setting the dor to 270, and wheel sensitivity to 3, it’s much easier to take corners. Also makes it easier to correct oversteer and prevent spins.

I’m no expert but here goes mine. First off, every setting depends on the users preferences but a couple of things i’ve found is with 540 dor try adjusting the wheel sensitivity to 2 or 3. To do this press and hold the mode button and pull the upshift paddle at the same time. Do this until the indicator light flashes 2 or 3 times whichever suits you.

Also my clutch I put it at 0-5 inside and 40-50 outside because i seems to damage the tranny too much if i shift quickly and my outside setting is at 100. My previous car i never had issues shifting gears quickly but for some reason i guess if the clutch is not pressed 100% and you are taking out or putting in gear you will damage your transmission 4% per instance. 40-50 outside will letthe transmission be fully disengaged when the pedal travels half the distance to full travel.

Thanks for the advise guys will give them a go

I have nothing to add other than saying Thank you for your service.

Thanks Bro means a lot

you are a bad a**. Thanks for your service. I don’t have a TM wheel but I imagine keeping the DOR low would help. Hell I cant even catch a drift with 2 hands and the DOR on my G920 at anything higher than 360*