Hi,
i have standalone Pedals ( HE Ultimates ), connected to the PC with USB.
I can map the pedals in the settings, but Ingame when i press the Trottle or Brake it only goes up to maybe 20-30%.
Wheel ( Fanatec V2 ), Shifter and Handbrake are working fine, only the Pedals won’t work 
Is there an option to calibrate the Pedals or is it a Bug?
Ps: sorry for my bad english
best regards
When you go into the controller options, you can press the F key for advanced controller options. There you can adjust the acceleration and deceleration axis deadzone.
Hi,
I know, tried everything out but it doesen’t change ingame… in all other games the pedals work perfect.
It would be good when you can add a calibrate guide for Wheels and Pedals like Assetto Corsa or Project Cars has?
I really want to play this game with my setup and hope you can help me.
best regards
Hi,
I have the exact same issue with my HE Pro.
(In Windows, the complete range of the pedals are detected.)
I set my brake pedal to 25% (75% deadzone) so it will actually function. I have Fanatec pedal with Thrustmaster wheel and the pedal with loadcell only depress about 40% for full braking power. This at least got me a working solution to play the demo but I’m also hoping that the full game will have the ability to calibrate the controls.
Does DIView have any effect?
Right click and select configure.
I tried everthing out but with Heusinkveld Pedals the Demo don’t work
I set many types of deadzones for gas & brake but nothing changes. I use DIView for calibration in Win and all other Sims work perfect. I also read that other people have the same issue with Heusinkveld pedals in the Demo.
I hope in the final version this issue is fixed.
I finally got my ProtoSimTech PT-1 pedals working by adding a lot of deadzone even though my pedals are calibrated with DIView and also calibrated in Windows. Here are the settings I ended up if it helps anyone as this required over an hour of trial and error to figure out what was going on and fix it.
Accelleration Axis Deadzone Inside: 5
Accelleration Axis Deadzone Outside: 43
Deceleration Axis Deadzone Inside: 5
Deceleration Axis Deadzone Inside: 100
I’m absolutely floored that I have to exit the race to the main menu to make changes to bindings and control configurations, forced to sit through all the promotional screens each and every time. A simple in-game throttle/brake pedal meter where deadzones are configured would have helped a TON and saved so much time.
work… in game see acceleration to max but car (ex. indycar) first 1, 2 gear is in power and 3, 4, 5, 6 not power and car slow :(((
