New painter question

Community Hub Community Content Paint Designs
,
1

I created a full design for the right side of my car. How can I get it to flip over in the exact same place on the left side? When I use the Import all from left/right option it shows up no where on the car as if the axis are not in the same place. I would search but since all the old forum posts were deleted I don’t know where to look. Thanks.

2

what you want to do is, highlight all the layers on the side you flipped and move that around untill you can see it, most likely up or down, what car was it on I’ll check it out properly

3

The holden commadore.

4

It comes out on the other side higher. So select all layers and then drag it down…

5

TIP

  1. On the side you have painted place one long horizontal line from front to back.
  2. Then copy that and rotate it 90 degrees so it touches the roofline.
  3. Copy the horizontal line to the front and rear and line up with the side you have painted.
  4. Then copy the vertical line, paste on top and line up with the side you have painted.
  5. No go to the side you want to import the graphics to and “Insert from other side”.
  6. All you have to do now is match the lines up with the front, back and sides.

Hope that helps!

1 Like
6

That! ^ ^ Do it on all my cars and its shows shift and scale really well.

7

Got it. Thanks for the help.