there is no option to change the steering wheel sensitivity in the advanced setting. so the wheel is always setting on 900 deg…
even with 900 deg setting (I cannot change that), the steering wheel si too much sensitive respect FH4 (with 540 deg setting, linearity 50%)… just like playing with a controller…
I haven’t tried setting the sensitivity yet, but I have reported a couple of other issues with the G920 on Xbox. Please take a look at these and support them if you have the same issues:
I have the same problem drifting with 900 degrees feels like I have to be a sweat to play I want to drift chill, not like I’m a professional drifter.
In horizon 4 it was adjustable why take it away. Also it doesn’t even register the wheel profile. I hope the next patch fixes this so I can slide the wheel back on.
Same issue here. Turned LINEARITY up to 1.7. This helped. But any drifting is no bueno. I’m not good drifting with the wheel though. I’ve always used the controller for drifting.
If you go to external view and then use keys or mouse to look at side of car, you will probably find as I did you hit max wheel lock at 100 degrees either way.
It does not matter what your wheel is set to rotation wise, if it is anything above that 200 it has no effect on the car wheels.
I am using a Logitech G25, I normally have it set to 540 or 900 depending on the sim but at the moment this game only uses 200, as far as I can see it does not register what your wheels rotation amount is set too. The in car steering wheel only goes 45 each way which is pathetic.
This is not the case. Both the interior steering wheel as well as the exterior wheels do NOT represent how much you are actually turning the vehicle. Easily testable in an open area. Turn left until wheels appear locked and drive in a circle. Then crank G920 wheel to full left lock and drive in a circle, it will be much tighter.