Cars - 2015 Jaguar XE-S - Livery not lining up

Troubleshooting Hub Horizon Troubleshooting FH5 Car Issues
1

I don’t know what to call this properly but when I put a livery over the fuel cap of the 2015 Jaguar XE-S in the Paints & Design editor it appears fine, along with in photo mode and Forzavista, but when I am in free roam the livery is not in the same place where I put it in the livery editor

27-07-2023_14-16-23-0ipifniq
27-07-2023_14-16-23-0ipifniq1920×1080 2.13 MB

27-07-2023_14-19-04-5omkweqd
27-07-2023_14-19-04-5omkweqd1920×1080 2.76 MB

Screenshot 2023-07-27 at 14.23.20
Screenshot 2023-07-27 at 14.23.202879×1561 3.54 MB

The first image is taken in forzavista and the second in photo mode in free roam, where the livery can be seen covering the fuel cap, where as in the final image (excuse the poor quality), the livery on the fuel cap isn’t lining up and rather half has gone missing. I don’t know what the issue is here, so I’m posting it here to see if anyone knows a fix. I have also tried moving the livery in the Paint & Designs tab but the same issue happens again. Thanks in advance.

2

That’s presumably related to the chosen grafics setting for textures. Anything below “High” can result in such misalignments.

The Editor and Forzavista are using “Ultra” IIRC. If you set the “World-/Car LOD” to “High” or “Ultra” in the menu the vinyl(s) should align properly.

3

Thank you for your help, but would this work on console

4

I have no clue about the available settings on consoles, sorry.

5

That’s fine, thank you for your help anyways