Moza SRP Lite pedals issue - PC

Miscellaneous Hardware & Peripherals
,
1

I have been using Moza SRP Lite pedals with a Moza USB hub for many months. I use a Thrustmaster 300 RS wheel. Both connect to the PC separately via USB. Recently I decided to assign the clutch as a hand brake to try drifting. After doing so my pedals are no longer working at all.

When I am on the Settings > Input page and assigning the gas and brake, it will only allow Device 1: Axis: 1 to be assigned to one item at a time. So, when I assign the brake after the gas it blanks out the Gas pedal assignment.

I tried editing the Thrustmaster 300 RS template and then creating a new, blank template but get the same result. I also notice now in the USB Game Controllers settings that the Universal HUB entry for the pedals is showing more than the X, Y, and Z axis. I’m thinking that maybe the USB Game Controller is seeing the Moza pedals as a wheel or something.

2025-02-06
2025-02-06400×455 10.3 KB

I tested in Assetto Corsa GT and the pedals work fine in that game, so it seems to be something with Forza MS. Any insight would be very much appreciated.

2

In case anyone runs into this themselves, I fixed the issue. I ended up starting Forza with the wheel unplugged and then was able to set the gas, brake, and clutch pedals successfully. They each showed up on a separate “axis”. Plugged the wheel in with the game still running and everything worked normal again.