Building a banked corner - need some help, suggestions

Trying to build a decent banked corner. It’s a real beast.

Looking for any help on the subject

@JJOEY_ROCKET have you built one?

Best solution I’ve found so far is to build from a banked track all the way. Doesn’t seem to be any easy way to transition from a level straight to a banked corner.

1 Like

Yea man that’s a hard one. Are you talking about building one from scratch or using the big banked prop?The only ones I’ve built I used massive sized prop. In my Gymkhana stadium blueprint I did a ramp before the big prop, in a couple other blueprints I lowered the prop into the ground so the entry is not as challenging.

I’m talking about scratch built. The prop ones are just far too tight of a radius for what I need.

yea that’s a real tough one, wish I had some better feedback. good luck

1 Like

Can’t seem to find a way other than starting from a banked straight.

And changing the banking just results in an uneven track.

Hear me out… The Hot Wheels tracks in the builder have pieces that work for a banked corner and transitions from a flat or less banked straight. Can you access them? Not sure if the dlc is required for building with them. My idea was to use them as a guide for the pavement pieces when you are building. No matter what it sounds like a lot of effort.

1 Like

Lots of tiny rotations and overlaps.

Take a look at this track by IchIchens (642 955 075). Particularly, the turn where my icon is. Not perfect, but probably one of the best transitions I’ve seen. But they used a ton of pieces to get there. I’m not that patient, lol…

1 Like

I’ll check it out. Btw, having driven your tracks I know the patience you have to creat a track. :wink:

I tried a variable degree banking on my first Bristol track and it was murder. Going back and redoing it with just a single degree bank.

Ok @TypeHardFark that’s one way to make it work. It actually looks like it takes less pieces and patience than the failed corner I made on my first attempt.

@WhiteBurrito42 so what kind of banking degrees and lengths or radius or turns do these have? Actually sounds like a viable solution. Could even prompt me to get the dlc.

I can take a closer look next time I have the game loaded.

1 Like

I would like to build an Indy track and a Daytona track. So I need some pretty long corner radius.

1 Like

Search for this track, this might help for inspiration - code 191 371 434 :+1:

1 Like

Interesting, I wish we could get real asphalt, concrete, and dirt track sections and banked/flat corners like the hot wheels tracks.

1 Like

Yeah, that would be so cool.