'13 Audi R8 Coupe vinyl application problem

Community Hub Community Content Paint Designs
,
1

Was working on paint for the '13 Audi R8 and ran into a problem with placing vinyls on the front quarterpanels. (See pic below.) There’s a glitch and the images get distorted and there’s a section that does not get covered at all no matter how I place the vinyls. Anyone else seen this issue or reported it to T10? Anyone know of any workarounds for this or am I stuck having to change my design to accommodate this issue?

Here I’ve applied a black square vinyl to the R8 and highlighted the problem area in red. You can see the top 3rd or so of the square is shifted to towards the front of the car and the circled area above the wheel does not get covered by vinyl at all no matter what the positioning. This issue occurs on both sides of the vehicle.

Edit: Is there a section of the forums here that lists known issues like this or a place to officially report these to T10?

2

The only thing I think you can do if im reading this right is probably change your base color to allow for the piece you cant paint…

3

Well, that’s what I’m afraid of. When I laid out the design I wanted to do for this car … that part of the design is not the same as the base color. But guess I may need to make a change to my original design.