Welcome,
Here i’ll be showing off a few liveries i’ll be doing on FM7, there won’t be much tho, as time limits me to do a lot of painting.
All my liveries are RACE inspired, Replicas, or based of real liveries, and some original work too!
First of all, i like to thank you for visiting,
Comments or feedback will always be appreciated, good or bad.
Also, every livery posted here can be requested with personal number/Gamertag
And manufacture decals can be done in any color on request too!
SHARED MANUFACTURE DECALS
LIVERY COMPETITION WINNERS
Week23: 2015 #3 Belgian Audi Club WRT Audi R8 LMS
SHARED LIVERIES
2018 #991 Herberth Motorsport Porsche 911 GT RSR
2018 #76 R-Motorsport Aston Martin Vantage GT3
2017 #5 WRT Belgian Audi Club Audi R8 LMS
2015 #3 WRT Belgian Audi Club Audi R8 LMS
2016 #16 Laser Tools Racing Mercedes A45 - Aiden Moffat
2017 #48 AMD Tuning Audi S3 - Ollie Jackson
Work In Progress
2018 #99 Rowe Motorsport BMW M6 GT3
2018 #17 WRT Belgian Audi Club R8 LMS
2018 #2 WRT Belgian Audi Club R8 LMS
2018 #1 WRT Belgian Audi Club R8 LMS
2 Likes
Great start mate, both spot on and very neat.
1 Like
#16 Aiden Moffat Laser Tools Racing Mercedes A45 (season 2016) SHARED
#48 Ollie Jackson AmD Tuning Audi S3 (Season 2017) SHARED
Thanks buddy!
Next project is one i started on FM6, but never got to finish it,
W-RacingTeam Audi R8 LMS, had to finish of the numberboard but never got around doing it!
Pictures soon online!
I also will post some pictures of all the vinylgroups i’ve shared
And i’ll gladly share different colorschemes on request too
PS: someone else have issues sharing liveries?
It says mine get downloaded and i get rewarded cr for it, but when i look at them in ‘my designs’ it says they are private?
Could someone verify if those two i’ve shown here are available for download?
1 Like
I searched your GT on both cars, the Audi is there but the Merc. didn’t appear…
Nice job on them by the way 
1 Like
The AMD Tuning audi should now be shared
As well as the Laser Tools Merc!
Also updated the OP with vinylgroups i’ve shared too
As said before, any of these can be requested in different colorschemes!
Awesome work, love the Technical Gearing on the Mustang. Must’ve taken a long while to do that! Very impressive.
Looking forward to the WIP being completed mate. Nice start on it.
Cheers, still struggling to find time to do some painting, and game still crashes on me on the laptop to in the vinyl editor (lost a good amount of work trying to build up vinylgroups…
Latest patch didn’t fix the crashing for me.
Was not really that hard to do, and with copy paste rotate i could do them rather quickly!
Only thing i don’t like myself is that i had to use a lot of masking. due to some thin circles.
But i found a workaround, so if i’m finishing of my other project i might redo this one, and try to avoid masking so i can use the cogs on a chrome base etc…
With the revival of our online racing league RFR i’m getting back into painting again.
and as we start with a Blancpain GT series, i got started on 2 new project at the same time.
Doing the Base and applying vinylgroups on the car at home on the xbox one x
And making these vinylgroups on my laptop, at work, during lunchbreaks.
-
Herberth Motorsport Porsche 911 RSR
-
ROWE Motorsport BMW M6 GTLM
-
WRT Racing Audi R8 LMS
will finish the old version i was still on, and then update to most recent livery (shame we don’t have the proper GT car model in the game tho)
more work in progress!
finalized the blancpain numberboard (will be shared soon)
there’s a crazy amount of detail in some of those logos, left some out of the crown of RACB logo,
numberboard already counts 1500 layers…
here’s a sneak peak at the WRT audi R8
also did some adjusting on the ROWE Motorsport BMW base.
While having a fully accurate board is great I think you can cut a significant number (hundreds) of layers since those logos will only be seen at a small scale.
Place the board on a car and ungroup one of the logos, then go through each layer one by one. If you can barely see the flash of the selected layer, delete it. Some of your layers will be 0.00/0.00 in size, which means they may as well not be there at all.
Just finished the old WRT livery,
2015 #3 Belgian Audi Club WRT Audi R8 LMS (SHARED)
1 Like
First time entering the livery comp!
And week23 winner!
Edit:
Looks like every entry seems to be a winner? 
1 Like
Thx, i always find that a good set of detailed decals can make or brake a design!
Most vinylgroups i spent about an hour on them, sometimes 2 or 3 depending on the complexity.
The base is generaly the easiest part imho. Altho with some of these glitched fenders and stuff it can be a challenge (like the B&O on the aston front bumper)
Scratch that, didn’t win with week 24 entry 
(2017 #5 WRT Audi R8)
2017 #5 Belgian Audi Club WRT Audi R8 LMS
Blancpain GT Series Entry
1 Like
I have shared a new set of vinylgroups! picture on top of the page.
As always, any of these can be requested in different color scheme!
Small update on the WIPs
#991 Herberth Motorsport Porsche 911 GT RSR
#99 Rowe Motorsport BMW M6 GTLM
Another project started while finalizing the Porsche,
Blancpain Endurance Series entry:
2018 #62 R-Motorsport Aston Martin Vantage GT3
had to move the B&O logo on front bumper below the line, because of bad distortion on the part around front fenders and headlights.
Awesome gallery! Love the clean lines of your designs and the attention to detail in your decals. Beautiful work!
Already Starting on a new livery, while finishing of more sponsor decals.
At the moment i can’t finish them due to some issues with the laptop.
#2 WRT Belgian Audi Club R8 LMS, 2018 Blancpain entry
Will try and make all 4 entries,
red #1
yellow #17
green #3
