[PC] Help, no FFB in PC version.

Troubleshooting Hub Legacy Troubleshooting Legacy Motorsport Issues
1

I downloaded and tried the demo on PC.

Wheel: Fanatec Clubsport V2 with BMW GT rim
Pedals: ECCI Trackstar 6000 3 pedal standalone USB unit

Pedals are connected separately by USB to the PC.

The game recognized all of my inputs in the controller setup. There was a preset for the clubsport V2 which I selected, but when I mapped my pedals, it switched to custom setup.

When I went into the race, I have no FFB. The steering and pedals work, but the wheel is completely dead, no feeling at all. I checked the advanced controller options and all the FFB settings are set to maximum. I also have the FFB set to 100 on my wheel.

2

Can you make sure all the drivers are updated on you computer? Can you also reboot your computer to see if the issues continues?

3

I’m using the Fanatec CSR Elite wheel and pedal set up with a thrust master 7 speed shifter, everything is working great other than the force feedback to my wheel, I’ve checked my drivers, tested other games, and even tried reinstalling the game. Any suggestions on how to fix? I’ve checked to make sure my wheel is supported and it is

4

I tried the PC demo. I am using an Accuforce Wheel and Protosimtech pedals. Everything binded properly ,but I have NO force feedback at all. I thought it was because my wheel is not officially supported,but I have read that others have the same problem with other wheels too. Is there plans to properly support the Accuforce wheel via shared memory output?

1 Like
5

I am also experiencing this issue with the G27

6

same here. ZERO FFB. steering, gas etc works but no FFB in any situation. my wheel is the “fully supported” T100.

7

The Game has Input Detection problems which result in the game working, accepting inputs, but no ffb through the wheel.

I had to reboot my wheel, then the game and it came back.

Question for you all:

Do you know what controller your usb ports are running through?
Intel? Asmedia? Fresco Logic?

8

I’ve tried rebooting and everything and it’s still not working, I’m going to try and reinstall my wheel firmware but other than that I have no idea… and I’m using intel

9

Unsure if this will solve it for you guys but I think my issue was on the windows 10 side of things. Just upgraded from 7 for this game.

If you have the g27 use the LGS 5.1 driver and software for the mapping. Do not use the LGS 8.8 or greater, it wont detect the wheel.

10

I have the same problem with Thrustmaster Ferrari F430 Force feedback wheel.

1 Like
11

OSW/Simucube here and the wheel springs to center only, no other FFB exists.

12

same here, thrustmaster t-gt, no ff.

13

Ihave the exact same problem with a fanatec csl Elite. Did anyone get a Solution for this?

Will it work to reinstall the firmware, or a older one?

A strange thing is, that when i switch my wheel xbox mode, (i play on pc) i get ffb. But it is waaay to strong and also cannot be regulated.