I need the torque/rpm numbers to enter in to forzatune 7 for the 66 Ford Gt Lemans and the Plymouth GTX FF. The numbers needed are “Max Torque” “RPM @ Max Torque” and “RPM @ Redline”. I would really appreciate some help! Trying to create some drag tunes for the cars.
If the graph escalates from 0-5000-10000 rpm, the increments are 1000 rpm each. If it escalates from 0-4000-8000, each step is 800 rpm.
ForzaTune has a channel on YouTube which can help you with this data. Their blog has a post concerning rpm ranges as well.
Max torque is given at the Select Car screen, which is a little bit annoying. Press Y while selecting a car until you get power, torque, weight and weight distribution values.
Telemetry (press down in the D-Pad while in a race) gives you real-time power and torque data. There’s a small delay in the readings, but it will always report the correct rpm values.
Thanks for your reply. Can’t find a rpm/torque graph for the GTX Plymouth or the Hunicorn Mustang so I’m having trouble getting the numbers needed. Thanks for taking time to get back to me!
1 Like
you can see the graph in the engine upgrades menu , just be sure to have your installed upgrade highlighted or you will get the wrong on screen info
you can also see the tq numbers by hitting Y , to cycle through the info at the bottom of the screen in the my cars menu ,
Unfortunately this doesn’t work with the Plymouth GTX FF and Hoonicorn because they don’t have any engine modifications. These two cars don’t have a visible RPM/Power/Torque graph. The only option is to drive them and trying to envision the graph via the telemetry.
Go to a track with a long straight like Le Mans. Get the car up to about 20mph and put it in 4th gear. Accelerate until you see the torque reach it’s max and see what RPM it does it at with the telemetry.
If you’re using max tq for tuning gears you’re doing it wrong
Actually, he is not…If this were real life. The reason is that gears are torque multipliers. You don’t shift until engine tq x gear in the next gear is higher than engine tq x gear in current gear. To find that, you need to know which rpm tq is max for the engine…and gear ratios. If it were me, I would want to see the whole tq graph as all engines are different and it may fall in its face after peak. Is this different in game?
It isnt different but why do all that math to find the highest average hp, which is what all of that math is telling you, when you could just pull up the telemetry and find the same info in 30 seconds