I have a problem with the rear end of my cars, especially on AWD. I’m not very used to play with the tuning, but I successfully make stable all around except at one precise moment, when I release the brakes, the car seems to oversteer for a moment then stabilize. Anyone can help me to find a solution please?
So you adjusted your breaks to have more pressure in the rear? And are you 50-50 on the power to the front and the rear explain a little more info pls. I only drive awd so check out some of my tunes for the subies…thank
You can try adjusting the deceleration setting on your differential. Setting it lower will reduce lift throttle oversteer. I’m not sure if that’s the problem, but it’s worth a try.
yeah! i didn’t think about the differential, I’ll try it.
My setup is really basic at the moment. I’ve lowered the car by 0.2 front and rear, suspension is back at default because I didn’t find the right setting yet. Brake power is 55% to the front and 115% of pressure. Tires at 29psi both front and rear. I’ve tweak the gearing but it didn’t affect the car handling.
Move your brake bias more toward the back. Simple as that. Try 50/50 and the problem should largely disappear.