How can you make a picture from inside the car?
the only way I have seen it done is by positioning the camera near the window and zooming in.
There are a couple of methods of doing this, I’ll post full descriptions in the Guide wiki thread (the one stickied at the top of the FM4 media section) when I have the time.
In short, for the first method you apply loads and loads of different vinyl shapes to the car, then change into another car. Change back to the car you covered with shapes and quickly select the option to take a photo while you’re in the homespace. As soon as you’ve pressed A to select the Take Photo option, push the left thumbstick forward and hold it through the loading screen. If done correctly, the decals will have made the load time longer, so that the camera moves before the car is fully loaded and therefore when it loads the car, the camera is inside the space where it spawns and you’ll be inside the interior. If you end up behind the car and facing away from it then you’ve put too many decals on and it’s taken so long to load the camera has moved to behind the car before it spawns. I’d recommend you try about 200 layers on the top and another 20 on one side for good measure. They don’t have to be visible either - you can set them to 0 opacity or move them so they can’t be seen, and this trick still works.
The other method only works in a few locations (of which only a couple are well known). The most common is the first turn on Silverstone - park the car so that it’s facing in the direction of the straight with the concrete wall very close on the left. Leave a gap about the length of the bonnet between the car and the tire wall in front. Enter photomode, position the camera on top of the tire wall facing the car, and then hold down LT. Keeping it held, push the left thumbstick slightly forward so you crawl off of the tire wall, landing on the tarmac between it and your car. The next bit doesn’t always work and is very hard to do, but you have to keep the left trigger held down and crawl around, pushing the camera against the car or either wall. The aim is to force the camera through the concrete wall so that it goes outside the track boundary. From there you can move through the wall into the side of the car (this is why you need to be parked close to it) or go under the car and press RT to go up into it.
A less effective method is to crash until the window smashes (only happens on a few cars) and zoom in, but that’s not the same as being actually in the interior.
I hope I’ve helped 
1 Like
hmmm gonna have to try that out. never new you could do that. thanks
Thanks I’ll try it
sure it works Thanks