The Brake bias for the M3 DTM is the opposite way around. I set It up with 60% to the front and 95 pressure and after driving about a bit I noticed only the rear brakes glowing, so I set it to 70% front and back to 100 pressure, deliberately locked the brakes and only the rears locked up. Is this happening for you guys?
I think brake bias has been reversed on all cars since the game came out,if you want more frt bias you need to set bias towards the rear and vice versa if you want rear bias.
Just tried the DBR9, its set at 60% and the fronts lock. I got the BMW too behave the same by using 40%.
It’s that way for all cars.
YOU DO NOT ADJUST FRONT BRAKE BIAS!
You are always adjusting the rear, so 60% is 60% to the rear.
Think of the slider as a scale, when you move the slider to he left, there is more weight on the right.
It would make more sense if everything the right of the slider were colored in.
Thanks, I don’t know why they’ve done it that way, the bar and graphic is very poor, they should have a percentage next to front just like other games and in real life if only one number is shown it refers to the front.
The whole car setup options need an overhaul, like the Anti roll bar settings need to be made into a real measurement , same with Aero and a bigger range of spring rates and castor because you can’t get the race cars set up anywhere close to a realistic setup. Left and right settings are a must too.